Fourth, the basic quality requirements of the outer packaging

1. box
The surface of the box should be smooth and straight, and there should be no obvious scratches, burrs (burrs), severe collapse and damage. The tightness of the opening of the box should be appropriate. When taking the flower box, do not use your fingers to forcibly peel it off, so as to pinch the edge of the lid, and the bottom of the flower box is qualified. The mirror surface, contents and the box inside the box should be firmly pasted, the mirror image should be good, and there should be no scratches or damage to the bottom.

2. Printing and labeling.
The patterns and handwriting printed on cosmetics packaging should be neat, clear, not easy to fall off, and uniform in color. The labels of cosmetic packaging should not be mis-posted, missed, or upside-down, and the paste should be firm. The labeling requirements shall be in accordance with the provisions of GB 5296.3.

3. Flower box.
The flower box should be tightly matched with the medium box packaging. The flower box should be clean, straight and level, and the box cover should be well covered, without wrinkles, missing edges, or missing corners. The bonding part of the flower box should be firmly pasted, without traces of pasting, cracking and mutual adhesion. The product has no wrong installation, missing installation, or upside-down installation.

4. Medium box
The middle box should be tightly matched with the flower box packaging. The middle box should be clean, upright, and flat, and the box cover should be closed. The bonding part of the middle box should be firmly pasted, without traces of pasting, cracking and mutual adhesion. The product has no wrong installation, missing installation, or upside-down installation. The label of the middle box should be correct, clean, and complete, and the product name, specification, box quantity and manufacturer's name should be indicated as required.

Fifth, the basic quality requirements of transportation packaging

Transport packaging should be neat, correct, and smooth, and tightly sealed. The product has no wrong installation, missing installation, or upside-down installation. The signs of the transportation package should be clear, complete, and in a suitable location. The product name, manufacturer’s name and address, net content, product quantity, FCL quality (gross weight), volume, production date and shelf life or production batch number and deadline should be indicated as needed. Use date.